A new level‐dependent coarse grid correction scheme for indefinite Helmholtz problems

In this paper, we construct and analyze a level‐dependent coarse grid correction scheme for indefinite Helmholtz problems. This adapted multigrid (MG) method is capable of solving the Helmholtz equation on the finest grid using a series of MG cycles with a grid‐dependent complex shift, leading to a stable correction scheme on all levels. It is rigorously shown that the adaptation of the complex shift throughout the MG cycle maintains the functionality of the two‐grid correction scheme, as no smooth modes are amplified in or added to the error. In addition, a sufficiently smoothing relaxation scheme should be applied to ensure damping of the oscillatory error components. Numerical experiments on various benchmark problems show the method to be competitive with or even outperform the current state‐of‐the‐art MG‐preconditioned Krylov methods, for example, complex shifted Laplacian preconditioned flexible GMRES. Copyright © 2013 John Wiley & Sons, Ltd.     

A preliminary approach of dynamic identification of slender buildings by neuronal networks

The study of the dynamic behavior of slender masonry structures is usually related to the preservation of the historic heritage. This study, for bell towers and industrial masonry chimneys, is particularly relevant in areas with an important seismic hazard. The analysis of the dynamic behavior of masonry structures is particularly complex due to the multiple effects that can affect the variation of its main frequencies along the seasons of the year: temperature and humidity. Moreover, these dynamic properties also vary considerably in structures built in areas where land subsidence due to the variation of the phreatic level along the year is particularly evident: the stiffness of the soil–structure interaction also varies. This paper presents a study to evaluate the possibility of detecting the variation of groundwater level based on the readings obtained using accelerometers in different positions on the structure. To do this a general case study was considered: a 3D numerical model of a bellower. The variation of the phreatic level was evaluated between 0 and −20 m, and 81 cases studies were developed modifying the rigidity of the soil–structure interaction associated to a position of the phreatic level. To simulate the dispositions of accelerometers on a real construction, 16 points of the numerical model were selected along the structure to obtain modal displacements in two orthogonal directions. Through an adjustment by using neural networks, a good correlation has been observed between the predicted position of the water table and acceleration readings obtained from the numerical model. It is possible to conclude that with a discrete register of accelerations on the tower it is possible to predict the water table depth.     

Die Füllstandsmeßeinrichtung 24016

Seit nahezu 10 Jahren warden vom VEB Robotron Meβelektronik “Otto Schön” Dresden kontinuierliche Füllstandsmeβeinrichtungen hergestellt. Sie arbeiten nach dem Prinzip der Strahlenstreuung im Füllgut. Quelle und Strahlungsdetektor befinden sich — durch einen Absorber getrennt — in einer gemeinsamen Sonde. Die Sonde wird durch einen Motorantrieb dem jeweiligen Füllstand nachgeführt. Diese Messung wird bei Behälterhöhen bis maximal 40 m eingesetzt. In den Behälter ist der Einbau eines Schutzrohres für die Sonde erforderlich. Da strahlungsquelle und Detektor in einer gemeinsamen Sonde untergebracht sind, wird keine groβe Quellenaktivität benötigt. Die beschriebene neue Entwicklung ersetzt ab 2. Halbjahr 1982 den mit einigen Nachteilen behafteten Vorläufer dieser Füllstandsmeβanlage. Durch die vorgenommenen Verbesserungen warden der Inbetriebnahme- und der Wartungsaufwand verringert und die Zuverlässigkeit erhöbt.     

高速公路PPP项目股权结构、质量水平与VFM的关系研究

高速公路PPP项目属于具有经营收益的准经营性项目,政府制定有效的激励措施,可以鼓励项目公司发挥专业的建设和运营能力,提高项目质量和收益水平。本文以VFM作为政府绩效评价指标,通过构建完全信息静态博弈模型,研究了PPP项目股权结构、质量水平与VFM之间的关系,结果发现:虽然社会资本较多持有项目公司股份有助于提高VFM水平,但随着社会资本方股权比例的增加,项目质量水平在不断降低,所以政府应该将社会资本方的持股比例控制在一定范围内,在保证项目质量的同时达到VFM最大化,从而降低政府方风险,提高社会效益。在高速公路PPP项目中,政府应优化股权决策,激励项目公司改善项目质量和水平,为公私双方带来良好的绩效水平。     

Recent advances of organometallic complexes in emerging photovoltaics

Organometallic complexes (OMCs) consisting of organic and metal active moieties have shown immense potential for application in solar cells. The diverse structure, rich porosity, and unique charge centers of OMCs enable them to be functional in solar cells. In this review, we introduced four types of OMCs, such as crown organometallic complexes, β-diketone metal complexes, cyclometallic complexes, and main chain metal-containing polymers, providing an in-depth analysis of the structure-performance relationship. OMCs could serve as active or interlayer materials in a variety of solar cell systems such as organic solar cells, perovskite solar cells, and dye-sensitized solar cells, especially some metals to improve the photoelectric performance of the device as dopants. In the end, perspectives on the opportunities and challenges of OMCs are given.     

Tunable and highly sensitive temperature sensor based on graphene photonic crystal fiber

Optical fiber temperature sensors have been widely employed in enormous areas ranging from electric power industry, medical treatment, ocean dynamics to aerospace. Recently, graphene optical fiber temperature sensors attract tremendous attention for their merits of simple structure and direct power detecting ability. However, these sensors based on transfer techniques still have limitations in the relatively low sensitivity or distortion of the transmission characteristics, due to the unsuitable Fermi level of graphene and the destruction of fiber structure, respectively. Here, we propose a tunable and highly sensitive temperature sensor based on graphene photonic crystal fiber (Gr-PCF) with the non-destructive integration of graphene into the holes of PCF. This hybrid structure promises the intact fiber structure and transmission mode, which efficiently enhances the temperature detection ability of graphene. From our simulation, we find that the temperature sensitivity can be electrically tuned over four orders of magnitude and achieve up to ～ 3.34×10^-3 dB/(cm·℃) when the graphene Fermi level is ～ 35 meV higher than half the incident photon energy. Additionally, this sensitivity can be further improved by ～ 10 times through optimizing the PCF structure (such as the fiber hole diameter) to enhance the light-matter interaction. Our results provide a new way for the design of the highly sensitive temperature sensors and broaden applications in all-fiber optoelectronic devices.     

Computational modelling of multi-material energetic materials and systems

ABSTRACT

In this paper, we present a systematic roadmap for developing a robust and parallel multi-material reactive hydrodynamic solver that integrates historically stable algorithms with new and current modern methods to solve explosive system design problems. The Ghost Fluid Method and Riemann solvers were used to enforce appropriate interface boundary conditions. Improved performance in terms of computational work and convergence properties was achieved by modifying a local node sorting strategy that decouples ghost nodes, allowing us to set material boundary conditions via an explicit procedure, removing the need to solve a coupled system of equations numerically. The locality and explicit nature of the node sorting concept allows for greater levels of parallelism and lower computational cost when populating ghost nodes. Non-linear numerical issues endemic to the use of real Equations of State in hydro-codes were resolved by using more thermodynamically consistent forms allowing us to accurately resolve large density gradients associated with high energy detonation problems at material interfaces. Pre-computed volume tables were implemented adding to the robustness of the solver base.     

Integrated Digital Image Correlation considering gray level and blur variations: Application to distortion measurements of IR camera

The acquisition of images with different modalities may involve different alterations with respect to an ideal model. Inhomogeneous brightness and contrast, blur due to non-ideal focusing, distortions are common. It is proposed herein to account for such effects for instance by registering a calibration target image with an actual optical image to measure lens distortions. An Integrated Digital Image Correlation (I-DIC) algorithm is proposed to account for the above artifacts and the algorithm is detailed. The resolution and uncertainty of the technique are first investigated on synthetic images, and then applied to the measurement of distortions for infrared (IR) images. The procedure is shown to reduce drastically the residual level assessing the validity of the image formation model, but more importantly allowing for a much improved registration of images.     

LC–MS bioanalysis of intact proteins and peptides

Bioanalysis assays that reliably quantify biotherapeutics and biomarkers in biological samples play pivotal roles in drug discovery and development. Liquid chromatography coupled with mass spectrometry (LC–MS), owing to its superior specificity, faster method development and multiplex capability, has evolved as one of the most important platforms for bioanalysis of biotherapeutics, particularly new scaffolds such as half-life extension platforms for proteins and peptides, as well as antibody drug conjugates. Intact LC–MS analysis is orthogonal to bottom-up surrogate peptide approach by providing whole molecule quantitation and high-level sequence and structure information. Here we review the latest development in LC–MS bioanalysis of intact proteins and peptides by summarizing recent publications and discussing the important topics such as the comparison between top-down intact analysis and bottom-up surrogate peptide approach, as well as simultaneous quantitation and catabolite identification. Key bioanalytical issues around intact protein bioanalysis such as sensitivity, data processing strategies, specificity, sample preparation and LC condition are elaborated. For peptides, topics including quantitation of intact peptide vs. digested surrogate peptide, metabolites, sensitivity, LC condition, assay performance, internal standard and sample preparation are discussed.